Products by Price $150 - $400

Vanerum Catalyst, 54" x 24" Work Desk Table, ADA Compliant • Standard surface construction is molded from a modified epoxy resin • 1” thick, non-glaring matte finish surface • All exposed edges have ” bevel • Square edges standard, 2” radius corners available • Specially compounded and cured for optimal chemical resistance with most alkalies, alcohols, acids, and solvents. • Self-extinguishing fire resistance • Also available in laminate, phenolic resin, and chemical resistant laminate FRAME SPECIFICATIONS • Constructed from ¾” x 4”wide rails • Legs are 2.25” square with ¼” radius edge • Wood is finished with a solid lacquer sealer with a satin finish • ADA compliant model available APRON & LEG SPECIFICATIONS • Apron is assembled using two 14-gauge leg brackets at each corner • Apron attached to top using 14-gauge angle brackets and #10 x ” pan head screws • Legs attached with 3.5” long hanger bolts, flat washers, and nylon insert lock nuts • Legs fitted with plastic boots designed for protection WORKSURFACE SPECIFICATIONS $590.00 $324.00	Vanerum Catalyst, 60" x 24" Work Desk Table WORKSURFACE SPECIFICATIONS • Standard surface construction is molded from a modified epoxy resin • 1” thick, non-glaring matte finish surface • All exposed edges have ” bevel • Square edges standard, 2” radius corners available • Specially compounded and cured for optimal chemical resistance with most alkalies, alcohols, acids, and solvents. • Self-extinguishing fire resistance • Also available in laminate, phenolic resin, and chemical resistant laminate FRAME SPECIFICATIONS • Constructed from ¾” x 4”wide rails • Legs are 2.25” square with ¼” radius edge • Wood is finished with a solid lacquer sealer with a satin finish • ADA compliant model available APRON & LEG SPECIFICATIONS • Apron is assembled using two 14-gauge leg brackets at each corner • Apron attached to top using 14-gauge angle brackets and #10 x ” pan head screws • Legs attached with 3.5” long hanger bolts, flat washers, and nylon insert lock nuts • Legs fitted with plastic boots designed for protection $520.00 $286.00	Vanerum Catalyst, 60" x 24" Work Desk Table, ADA Compliant WORKSURFACE SPECIFICATIONS • Standard surface construction is molded from a modified epoxy resin • 1” thick, non-glaring matte finish surface • All exposed edges have ” bevel • Square edges standard, 2” radius corners available • Specially compounded and cured for optimal chemical resistance with most alkalies, alcohols, acids, and solvents. • Self-extinguishing fire resistance • Also available in laminate, phenolic resin, and chemical resistant laminate FRAME SPECIFICATIONS • Constructed from ¾” x 4”wide rails • Legs are 2.25” square with ¼” radius edge • Wood is finished with a solid lacquer sealer with a satin finish • ADA compliant model available APRON & LEG SPECIFICATIONS • Apron is assembled using two 14-gauge leg brackets at each corner • Apron attached to top using 14-gauge angle brackets and #10 x ” pan head screws • Legs attached with 3.5” long hanger bolts, flat washers, and nylon insert lock nuts • Legs fitted with plastic boots designed for protection $594.00 $326.00
Vanerum Catalyst, 60" x 30" Work Desk Table • Standard surface construction is molded from a modified epoxy resin • 1” thick, non-glaring matte finish surface • All exposed edges have ” bevel • Square edges standard, 2” radius corners available • Specially compounded and cured for optimal chemical resistance with most alkalies, alcohols, acids, and solvents. • Self-extinguishing fire resistance • Also available in laminate, phenolic resin, and chemical resistant laminate FRAME SPECIFICATIONS • Constructed from ¾” x 4”wide rails • Legs are 2.25” square with ¼” radius edge • Wood is finished with a solid lacquer sealer with a satin finish • ADA compliant model available APRON & LEG SPECIFICATIONS • Apron is assembled using two 14-gauge leg brackets at each corner • Apron attached to top using 14-gauge angle brackets and #10 x ” pan head screws • Legs attached with 3.5” long hanger bolts, flat washers, and nylon insert lock nuts • Legs fitted with plastic boots designed for protection WORKSURFACE SPECIFICATIONS $547.00 $300.00	Vanerum Catalyst, 60" x 30" Work Desk Table, ADA Compliant • Standard surface construction is molded from a modified epoxy resin • 1” thick, non-glaring matte finish surface • All exposed edges have ” bevel • Square edges standard, 2” radius corners available • Specially compounded and cured for optimal chemical resistance with most alkalies, alcohols, acids, and solvents. • Self-extinguishing fire resistance • Also available in laminate, phenolic resin, and chemical resistant laminate FRAME SPECIFICATIONS • Constructed from ¾” x 4”wide rails • Legs are 2.25” square with ¼” radius edge • Wood is finished with a solid lacquer sealer with a satin finish • ADA compliant model available APRON & LEG SPECIFICATIONS • Apron is assembled using two 14-gauge leg brackets at each corner • Apron attached to top using 14-gauge angle brackets and #10 x ” pan head screws • Legs attached with 3.5” long hanger bolts, flat washers, and nylon insert lock nuts • Legs fitted with plastic boots designed for protection WORKSURFACE SPECIFICATIONS $612.00 $336.00	Vanerum Curve, Adjustable Height Classroom School Desk, 25.5" x 19"D FRAME SPECIFICATIONS • 1.25” diameter one piece C–Frame design • Weldless construction is 13 gauge steel tube with rotary bend • Fixed frames available in three different heights • Worksurface secured to brackets with #10 self tapping screws and steel straps • Powder coat finished – Standard Charcoal Metallic • Also available with wire book rack • Height adjustable version available GLIDE SPECIFICATIONS • 1” x 2” nylon slide caps, riveted to tube • Rear of frame equipped with anti-tilt saddle foot, riveted to tube • Available with felt inserts WORKSURFACE SPECIFICATIONS • 1.125” table top thickness • Standard core construction is 44lb. density particle board • 2” radius corners standard, square edges available upon request • 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive • Greenguard certified High Pressure Laminate comes standard with our full range of laminate options $278.00 $152.00
Vanerum Ellipes, 36" Round Cafeteria Dining Conference Table WORKSURFACE SPECIFICATIONS • 1.125” table top thickness • Standard core construction is 44lb. density particle board • 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive • Greenguard certified High Pressure Laminate comes standard with our full range of laminate options BASE SPECIFICATIONS • Available with 18” or 23.75” base spread depending on surface size • Surface attached to 12” x 12” - 4 gauge metal plate, ridge bolted • 4” column diameter – 16 gauge wall • Base is constructed of ¼” thick steel • Available in cast-iron option • Available in standard or bar height GLIDE SPECIFICATIONS • Black ABS plastic levelers available upon request • ½” adjustment on optional levelers $627.00 $344.00	Vanerum Flow, Armless Poly Swivel Chair Additional freight will apply, and added on to order. Please inquire for accurate quote, 866-800-0028 $278.00 $153.00	Vanerum Horizon, Contemporary Armless Wood Stack Chair SHELL SPECIFICATIONS • 1” saddled ply seat and back • Optional upholstered seat and back available in COM fabrics COM Requirements 0.5 - 1 yd(s) • Can be constructed to meet CAL 133 FRAME SPECIFICATIONS • 2 cross braces for seat mounting • Fully welded • Wear resistant powder coat finish available in any color • Chair stacks 5 high • Available in chair, arm chair and barstool options GLIDE SPECIFICATIONS • Plastic ball joint swivel for even contact with floor • Casters optional $564.00 $310.00
Vanerum Mirage, 48" x 24" Adjustable Wire Management Training Table WORKSURFACE SPECIFICATIONS • 1.125” table top thickness • Standard core construction is 44lb. density particle board • 2” radius corners standard, square edges available upon request • 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive • Greenguard certified High Pressure Laminate comes standard with our full range of laminate options BASE SPECIFICATIONS • Leg is adjustable from 22”–32” • Upper finish is Charcoal Metallic powder coated steel • Lower is Silver powder coated steel • Attached to top with a metal-to-metal connection • Locking/non-locking casters are available • Floating J–Trough modesty panel for organized wire management • Modesty panel constructed of 18 gauge, powder-coated steel GLIDE SPECIFICATIONS • Black, non-marring nylon feet • Internal gripper spring for secure hold within tube • Foot of glide is ½” tall with a 1.38” diameter • Glide attachment has ¼, 20 thread and is 1.5” long $682.00 $375.00	Vanerum Opti + Fixed Height Sled Base Laminate Training Table • 1” table top thickness • Standard core construction is 45lb. density particle board • 2” radius corners standard (square edges available upon request) • Vinyl edgeband applied with medium-viscosity, high-melt adhesive • Greenguard certified High Pressure Laminate comes standard with our full range of laminate options BASE SPECIFICATIONS • Ergonomic design based on balanced seating principles • Hydroformed steel column, with an oblong shape to prevent misalignment • Integral casters and glides • Storage drawer optional for accessories and technology • Integrated poly footrest adjustable to users ergonomic requirements • Fixed Height, 5 heights available: 23”, 25”, 27.5”, 30”, 32” SURFACE SPECIFICATIONS $450.00 $247.00	Vanerum Optimax Adjustable Ergonomic School Desk SURFACE SPECIFICATIONS • 1.125” table top thickness • Standard core construction is 44lb. density particle board • 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive • Greenguard certified High Pressure Laminate comes standard with our full range of laminate options • Seat is soliwood construction made of 17 layers of ply beech wood FRAME SPECIFICATIONS • 1.178” x 2.437” oval, 13 gauge steel tube legs • T–design dual access base • Holes for footrest are adjustable in 1.5” increments • Thru-bolt 1.5” surface stretcher bar • Durable, powder coat finish • Fitted with black injection molded frame caps and end caps • 2.5”d x 1.5”w, 11ga. welded base beam for stability • 2” rear casters for tilt-to-move mobility GLIDE SPECIFICATIONS • 1” hex adjustable nylon platform glide • Steel, nickel plated threaded shaft glide $520.00 $286.00