V S Ergo

• 1.125” table top thickness

• Standard core construction is 44lb density particle board

• Available with grommets on worksurface

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full range

of laminate options

CASE SPECIFICATIONS

• Standard melamine construction with ¾” side and back panels

• 20” wide case two separate storage compartments

• 18” wide compartment has open top with single file drawer, available with

optional hanging bars

• Adjustable shelves available, which adjust in 1” increments

• 12” wide compartment has top box drawer with 6” high drawer front

• Full extension slides on all drawers

• Grommet hole available in bottom of case for easy wire access

• Unit rests on four, 3” urethane coated, locking casters

AUXILIARY WORKSURFACE SPECIFICATIONS

• Teardrop shape 40”w x 28”d swinging worksurface pivots on side of unit

• Optional left or right configuration

• Auxilary surface roles on three, 2.5” powder coated legs with 2” locking casters

• 1.125” table top thickness

• Standard core construction is 44lb. density particle board

• 2” radius corners standard, square edges available upon request

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• Leg is adjustable from 22”–32”

• Upper finish is Charcoal Metallic powder coated steel

• Lower is Silver powder coated steel

• Attached to top with a metal-to-metal connection

• Locking/non-locking casters are available

• Floating J–Trough modesty panel for organized wire management

• Modesty panel constructed of 18 gauge, powder-coated steel

GLIDE SPECIFICATIONS

• Black, non-marring nylon feet

• Internal gripper spring for secure hold within tube

• Foot of glide is ½” tall with a 1.38” diameter

• Glide attachment has ¼, 20 thread and is 1.5” long

• Standard core construction is 44lb. density particle board

• 2” radius corners standard, square edges available upon request

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• Leg is adjustable from 22”–32”

• Upper finish is Charcoal Metallic powder coated steel

• Lower is Silver powder coated steel

• Attached to top with a metal-to-metal connection

• Locking/non-locking casters are available

• Floating J–Trough modesty panel for organized wire management

• Modesty panel constructed of 18 gauge, powder-coated steel

GLIDE SPECIFICATIONS

• Black, non-marring nylon feet

• Internal gripper spring for secure hold within tube

• Foot of glide is ½” tall with a 1.38” diameter

• Glide attachment has ¼, 20 thread and is 1.5” long

• 1.125” table top thickness

• Standard core construction is 44lb. density particle board

• 2” radius corners standard, square edges available upon request

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• Leg is adjustable from 22”–32”

• Upper finish is Charcoal Metallic powder coated steel

• Lower is Silver powder coated steel

• Attached to top with a metal-to-metal connection

• Locking/non-locking casters are available

• Floating J–Trough modesty panel for organized wire management

• Modesty panel constructed of 18 gauge, powder-coated steel

GLIDE SPECIFICATIONS

• Black, non-marring nylon feet

• Internal gripper spring for secure hold within tube

• Foot of glide is ½” tall with a 1.38” diameter

• Glide attachment has ¼, 20 thread and is 1.5” long

• Standard core construction is 44lb. density particle board

• 2” radius corners standard, square edges available upon request

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• Leg is adjustable from 22”–32”

• Upper finish is Charcoal Metallic powder coated steel

• Lower is Silver powder coated steel

• Attached to top with a metal-to-metal connection

• Locking/non-locking casters are available

• Floating J–Trough modesty panel for organized wire management

• Modesty panel constructed of 18 gauge, powder-coated steel

GLIDE SPECIFICATIONS

• Black, non-marring nylon feet

• Internal gripper spring for secure hold within tube

• Foot of glide is ½” tall with a 1.38” diameter

• Glide attachment has ¼, 20 thread and is 1.5” long

• Leg is adjustable from 22”–32”

• Upper finish is Charcoal Metallic powder coated steel

• Lower is Silver powder coated steel

• Attached to top with a metal-to-metal connection

• Locking/non-locking casters are available

• Floating J–Trough modesty panel for organized wire management

• Modesty panel constructed of 18 gauge, powder-coated steel

GLIDE SPECIFICATIONS

• Black, non-marring nylon feet

• Internal gripper spring for secure hold within tube

• Foot of glide is ½” tall with a 1.38” diameter

• Glide attachment has ¼, 20 thread and is 1.5” long

• 1.125” table top thickness

• Standard core construction is 44lb. density particle board

• 2” radius corners standard, square edges available upon request

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• Leg is adjustable from 22”–32”

• Upper finish is Charcoal Metallic powder coated steel

• Lower is Silver powder coated steel

• Attached to top with a metal-to-metal connection

• Locking/non-locking casters are available

• Floating J–Trough modesty panel for organized wire management

• Modesty panel constructed of 18 gauge, powder-coated steel

GLIDE SPECIFICATIONS

• Black, non-marring nylon feet

• Internal gripper spring for secure hold within tube

• Foot of glide is ½” tall with a 1.38” diameter

• Glide attachment has ¼, 20 thread and is 1.5” long

• L-shaped worksurface with 34” deep peninsula top

• Peninsula top rests on 4”, powder coated post leg on an adjustable nylon glide

• 1.125” table top thickness

• Peninsula top equipped with clip on wire management below worksurface

• Hanging, powder coated, perforated metal modesty panel on front of peninsula

• Standard core construction is 44lb. density particle board

• Square end has 2” radius corners standard

• 3mm vinyl edgeband applied with medium viscosity, high melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full range

of laminate options

PEDESTAL & BOOKCASE SPECIFICATIONS

• Worksurface’s center is supported by a box/box/file cabinet with 4” wire pulls

on all drawer fronts

• Two grommet holes, one at top and one at bottom of pedestal, for easy wire

organization

• Pedestal has locking back panel for keyed access to wire storage in back of case

• 19” worksurface supported by open bookcase with one adjustable shelf

• Grommets on side of bookcase with built in wire management for inside access to

wire-management trough

• Pedestal and bookcase, standard melamine construction

BOOKSHELF SPECIFICATIONS

• 34”w x 12”d bookshelf surface on 12” powder coated metal standoffs

• Shelf equipped with five, pre-set bent wire bookends

• Total height of desking system with bookshelf: 42”

• Unique, oversize, super-plush seat cushion

• Square upholstered (grade 10) seat

• Upholstered seat available in COM fabrics: COM Requirements 1.25 yd(s)

• Cording provides a structured edge and maintains the cushion shape

FRAME SPECIFICATIONS

• Counter and bar height includes fully welded footring

• Available in freestanding, bolt-down and core-drilled models

GLIDE SPECIFICATIONS

• 8 glides provide even contact with floor

• Polypropylene blow molded one piece shell acts an air cushion providing comfort

and support

• Unique front contour promotes circulation and allows for a variety of ergonomically

correct seating positions

• Lumbar support and curvature of the back provide comfort and continuous support

• Built-in handle provides easy mobility

• Stacks 7 high

• Available in two size shells to accommodate children and adults

BASE SPECIFICATIONS

• Fully welded (MIG) frame construction

• Powder coated frame for a durable protected finish

• Also available in Cantilever, 5-Star, and 4- Leg bases

• C-Frame allows for easy desktop storage and minimal frame obstruction

• 16mm x 31mm flat oval bended tube construction

• 2mm/14 gauge steel

GLIDE SPECIFICATIONS

• Equiped with anti-tip saddle foot riveted to frame

• Available with nylon or felt glides

• Standard core construction is 45lb. density particle board

• 2” radius corners standard (square edges available upon request)

• Vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• Ergonomic design based on balanced seating principles

• Hydroformed steel column, with an oblong shape to prevent misalignment

• Integral casters and glides

• Storage drawer optional for accessories and technology

• Integrated poly footrest adjustable to users ergonomic requirements

• Fixed Height, 5 heights available: 23”, 25”, 27.5”, 30”, 32”

• 1.125” table top thickness

• Standard core construction is 44lb. density particle board

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full range

of laminate options

• Seat is soliwood construction made of 17 layers of ply beech wood

FRAME SPECIFICATIONS

• 1.178” x 2.437” oval, 13 gauge steel tube legs

• T–design dual access base

• Holes for footrest are adjustable in 1.5” increments

• Thru-bolt 1.5” surface stretcher bar

• Durable, powder coat finish

• Fitted with black injection molded frame caps and end caps

• 2.5”d x 1.5”w, 11ga. welded base beam for stability

• 2” rear casters for tilt-to-move mobility

GLIDE SPECIFICATIONS

• 1” hex adjustable nylon platform glide

• Steel, nickel plated threaded shaft glide

• 1.125” table top thickness

• Standard core construction is 44lb. density particle board

• 2” radius corners standard, square edges available upon request

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• 1.25” round 18 gauge steel tube

• Adjustable from 21”–29”

• Adjust in 1” increments and firmly lock into place with heavy-duty set screws

• Constructed with heavy-gauge tubular steel

• Legs are reinforced with solid #4 steel rod braces, steel-welded to leg plates

• Available with wire book rack

GLIDE SPECIFICATIONS

• 1.25” rubber cushioned, non-marring glides

• Nickel plated with steel ball joint swivel

• Also available in steel

• Standard core construction is 44lb. density particle board

• 2” radius corners standard, square edges available upon request

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• 1.25” round 18 gauge steel tube

• Adjustable from 21”–29”

• Adjust in 1” increments and firmly lock into place with heavy-duty set screws

• Constructed with heavy-gauge tubular steel

• Legs are reinforced with solid #4 steel rod braces, steel-welded to leg plates

• Available with wire book rack

GLIDE SPECIFICATIONS

• 1.25” rubber cushioned, non-marring glides

• Nickel plated with steel ball joint swivel

• Also available in steel

• 1.125” table top thickness

• Standard core construction is 44lb. density particle board

• 2” radius corners standard, square edges available upon request

• Stretcher bars available for additional support

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

• Custom shapes and sizes available

BASE SPECIFICATIONS

• 1.25” round 18 gauge steel tube

• Height adjustable from 23”–29”

• Constructed with heavy-gauge tubular steel

• Legs are reinforced with solid #4 steel rod braces, steel-welded to leg plates

• Black legs standard

GLIDE SPECIFICATIONS

• 1.25” rubber cushioned, non-marring glides

• Nickel plated with steel ball joint swivel

• Also available in steel

• 1.125” table top thickness

• Standard core construction is 44lb. density particle board

• 2” radius corners standard, square edges available upon request

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• Many drawer configurations available including box/box/file and file/file

• Includes Perforated modesty panel and center drawer

• Pedestals have a removable core, master keyed lock

• Full extension, precision ball bearing slides

CASTER SPECIFICATIONS

• 50mm wheel diameter, 38mm barrel diameter

• Unique, oversize, super-plush seat cushion

• Square upholstered (grade 10) seat

• Upholsered seat available in COM fabrics: COM Requirements 1.25 yd(s)

• Cording provides a structured edge and maintains the cushion shape

FRAME SPECIFICATIONS

• Counter and bar height includes fully welded footring

• Available in freestanding, bolt-down and core-drilled models

GLIDE SPECIFICATIONS

• 8 glides provide even contact with floor

• Pneumatic released rising monitor storage system

• Accommodates monitors up to 21” wide

• Storage for keyboard and mouse inside monitor cavity

• Interior wire management

• Monitor tilts for easy viewing and ergonomics

• Optional Locking mechanism for increased security

• CPU holder